otometrics Hortmann Vestlab 100, User Manual

Page: 89 / 102

Otometrics
87
Printing a report
Importing patient data
Note ·
If an item has been set to both
New Line
and
New Page
on the
Report Items
tab, the item starts on a new page and a new line. The setting
Skip ‘Top’ Property on
New Page
has no effect on the start position of the item. The position is determined by
the
New Line
setting.
Click
OK
. Enter the template name and click
Save
.
5.5 Importing patient data
1. Click
Open
.
2. Click the
Browse
icon .
3. Browse to locate patient file.
Footer (mm) Sets the height of the footer
Skip ‘Left’
property on
new line Select to eliminate small space between the left page
edge and the left edge of all items set to
New Line
.
Skip ‘Top’
property on
new page Select to eliminate small space between the bottom of
the header and the top edge of all items set to
New
Page
.
Standard
header Select to insert the standard header. (Standard header is
defined in
Settings>Program>Printout
.)
Header
bitmap Select to insert the desired bitmap in the header of the
new template. Press to locate the bitmap. Select the
bitmap image and click
Open
to insert.
Note ·
When creating the bitmap, it is recommended to
size the bitmap to print at these paper dimensions:
- height of approximately 1 inch
- width set to the paper width minus the combined width
of the left and right margins.
For example, for a 300 DPI printer, the height of the bit-
map would be approximately 300 pixels. The width in
pixels is equal to the number of inches calculated for the
width multiplied by 300.
Select
Click to select the new font and font size. Once
selected, the font name and size are displayed next to
Font name
and
Font size
.
Document settings