manualshive.com logo in svg

otometrics Hortmann Vestlab 100, User Manual

Share
Download
otometrics Hortmann Vestlab 100 User Manual Download Page 39

Otometrics

37

 General test information

Editors

The calibration factor is calculated by the difference of the red and blue line and 
determines the degree to which the eye moves based on the angle.

1. To change the position of the lines click and drag them or move the sliders at the 

left or right edge of the diagram.

2. Select the channel you want to edit by clicking the corresponding radio button.
3. Click 

Reset

 to perform an automatic analysis.

4. Click 

OK

 to confirm the changes.

3.7.2

Nystagmus Editor

Applies to all tests except calibration and platform tests. 

Examination

Repeat

Repeat the data collection for that test. The 
current test will be overridden.

New Analysis

Reanalyze the data.

Settings

Activate the Nystagmus Analysis Settings dia-
log.

Close

Close the nystagmus analysis editor window.

Edit

Next

Move mark to the next nystagmus beat

Summary of Contents for Hortmann Vestlab 100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands