otometrics Hortmann Vestlab 100 User Manual Download Page 59

Page: 59 / 102

Otometrics

Test Battery

Gaze test

4.4.6

Gaze test settings

The settings can be accessed from the menu bar:

Settings > Tests > Gaze

Measurement

Duration (s)

Set the test duration of the measurement.

Fixation dur. (s)

Define for how long the fixation light must be on. In a
conventional gaze test, this should be set to zero!

Fixation onset (s)

Set when the fixation light must go on. If Fixation dura-
tion is set to zero this will be greyed out.

Analysis profile

Select the analysis profile to be used to detect nystagmus
in the measurement. The analysis profiles can be config-
ured from the menu bar:

Settings > Nystagmus anal-

ysis

Threshold

Minimum response setting used to determine when
nystagmus is present and displayed in the Stoll diagram.

View/Layout

Horizontal, vertical

Select the channels to be displayed on the screen.

Channel distance (°)

Set the distance between the horizontal and vertical
channel.

Channel scaling (°)

Set the amplitudes displayed for each measurement; 40
will be displayed as -20

to +20

on the y-axis.

Summary of Contents for Hortmann Vestlab 100







































































































Search results

Summary of Contents for Hortmann Vestlab 100

Reviews:

Brands by name

Popular brands

otometrics Hortmann Vestlab 100, User Manual

Search results

Summary of Contents for Hortmann Vestlab 100

Reviews:

Brands by name

Popular brands