Otometrics
83
Printing a report
Creating a new multi-test report template
To change the
•
location
of the highlighted item, position the cursor on the item and hold down
the left click button. Drag the item to the desired location.
•
height
of the item, position the cursor along the bottom edge. Once the
up/down arrow appears, drag to the desired height.
•
width
of the item, position the cursor along the right edge. Once the left/right
arrow appears, drag to the desired width.
Alternatively, to change the position and size of the items, you can enter new values
in the
Report Items
tab.
Change item position
Change item dimensions
Settings for item position and size
Left (mm)
Distance from either the left margin or the right edge of
the item appearing at the left of this item.
Top (mm)
Distance from the bottom of the header or the bottom
edge of the item appearing directly above this item.
Width (mm)
Width of selected item.
Height (mm)
Height of selected item.
Summary of Contents for Hortmann Vestlab 100
