manualshive.com logo in svg

otometrics Hortmann Vestlab 100, User Manual

Share
Download
otometrics Hortmann Vestlab 100 User Manual Download Page 67

Otometrics

65

 Test Battery

Calorics test

Note · 

The test settings include both Position and Positioning tests. Only Positioning test 

will be explained here.

The settings can be accessed from the menu bar: 

Settings > Tests > Position/Posi-

tioning

.

4.7

Calorics test

4.7.1

Description

Caloric tests provide an objective evaluation of the function of the vestibular laby-
rinths.

Irrigation with either water or air induces nystagmus in patients with a functioning 
balance system. The nystagmus resulting from the irrigations in both ears are com-
pared for evaluation.

Position

Duration (s)

Set the test duration of the measurement.

Analysis profile

Select the analysis profile to be used to detect nys-
tagmus in the measurement. The analysis profiles 
can be configured from the menu bar: 

Settings > 

Nystagmus analysis

.

View/Layout

Channel distance (°)

Set the distance between the horizontal and vertical 
channel.

Channel scaling (°)

Set the amplitudes displayed for each measure-
ment; 40 will be displayed as -20

°

 to +20

°

 on the y-

axis.

Hallpike-Stenger

Includes nine re-positionings of the patient during 
the test. Follow clinic/hospital procedures.

Dix-Hallpike

Includes four re-positionings of the patient during 
the test. Follow clinic/hospital procedures.

Horizontal vertical

Select the channels to be displayed on the screen.

Summary of Contents for Hortmann Vestlab 100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands