manualshive.com logo in svg

otometrics Hortmann Vestlab 100, User Manual

Share
Download
otometrics Hortmann Vestlab 100 User Manual Download Page 77

Otometrics

75

 Test Battery

Further tests

4.8

Further tests

With this feature you can define your own test.

The settings can be accessed from the menu bar: 

Settings > Tests > Further Tests

.

Tests

• Click the 

New

 icon to create a new test.

• Click the 

Delete

 icon to delete the marked test from the list.

• Click the 

Up

 icon to move the marked test one position upwards in the list.

• Click the 

Down

 icon to move the test one position downwards in the list.

• To change the name of a test, click on it to mark it, then click on it again. Press 

Enter

 when you have changed the caption. Do not delete all letters from the test 

caption. This will delete the test.

Channel scaling (°)

Set the amplitudes displayed for each measure-
ment; 40 will be displayed as -20

°

 to +20

°

 on the y-

axis.

SPV scaling (°/s)

Set the range displayed in the SPV diagram.

View/Layout

Summary of Contents for Hortmann Vestlab 100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands