manualshive.com logo in svg

otometrics Hortmann Vestlab 100, User Manual

Share
Download
otometrics Hortmann Vestlab 100 User Manual Download Page 65

Otometrics

63

 Test Battery

Positioning test

3. Once complete, a smooth, quick motion bring the patient into a lying position 

and start the measurement by double-clicking in the grid titled 

Head straight, 

head reclined

.

4. When the measurement is completed, bring the patient back to a sitting position 

and start the measurement by double-clicking in the bottom grid titled 

Head 

straight, sitting

.

5. Repeat the three measurements with the patient's head turned to the right and 

left side.

Dix-Hallpike test

The patient sits on the bed looking straight ahead with video goggles closed.

Note · 

All tests should be started immediately after re-positioning the patient to identify 

any nystagmus. It is recommended to video record the eye in order to identify any rota-
tional nystagmus.

1. Move the patient's head to the right (45

°

) and in a smooth, quick motion bring 

the patient into a lying position with the head hanging downward, but sup-
ported, from the bed.

2. When the measurement is completed, bring the patient back to a sitting position 

and perform the test with patient's head to the left.

3. During the measurement observe potential rotational nystagmus by observing 

the eye on the computer screen and video recording.

4.6.4

Positioning test score

The following is an example of the Hallpike-Stenger window.

Summary of Contents for Hortmann Vestlab 100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands