otometrics Hortmann Vestlab 100, User Manual

Page: 15 / 102

Otometrics
13
Introduction
About this manual
1.4.4 Configure network for single work folder
1. Choose one of the PCs for storing all patient files.
2. On the remaining PCs, set the work folder (
Program > Settings > File adminis-
tration
) to the Vestlab files folder of the PC chosen in step 1 (typically located in
the
Shared Documents
folder).
Note · Ensure that these PCs have Read and Write access to the new work folder (the
Vestlab files folder on the PC chosen for file storage).
1.5 About this manual
This is your guide to using the Hortmann Vestlab 100 System.
We strongly recommend that you read through the screen descriptions in this manual
before you use the Hortmann Vestlab 100 System for the first time.
1.5.1 Safety
This manual contains information and warnings which must be followed to ensure
the safe performance of the Hortmann Vestlab 100 System.
Local government rules and regulations, if applicable, should also be followed at all
times.
1.6 Typographical conventions
The use of WARNING, CAUTION and NOTE
For safety reasons and appropriate use of the Vestlab Software, the manual contains
WARNINGS
,
CAUTIONS
and
NOTES
, which you should read carefully. The use of
these headings is denoted as follows:
Warning · Indicates that there is a risk of danger to persons and data.
Caution · Indicates that there is a risk of damage to data.
Note · Indicates that you should take special notice.
1.6.1 Navigating this manual
Menus, icons and functions to select are shown in bold type, as for instance in:
• Click the
Open
icon on the toolbar or select
File > Open...