manualshive.com logo in svg

otometrics Hortmann Vestlab 100, User Manual

Share
Download
otometrics Hortmann Vestlab 100 User Manual Download Page 63

Otometrics

61

 Test Battery

Positioning test

Note · 

The test settings include both Position and Positioning tests. Only Position test 

will be explained here.

The settings can be accessed from the menu bar:

 

Settings > Tests > Position/Posi-

tioning

.

4.6

Positioning test

4.6.1

Description

In contrast to the Position test, the Positioning test provides an objective measure-
ment of eye movement triggered by a change in position.

This test can detect Benign Paroxysmal Positional Vertigo (BPPV). Nystagmus 
caused by BPPV typically occurs with a slight onset delay after the patient is re-posi-
tioned, and it rapidly decreases in severity until absent.

Position

Duration (s)

Set the test duration of the measurement.

Analysis profile

Select the analysis profile to be used to detect nys-
tagmus in the measurement. The analysis profiles 
can be configured from the menu bar: 

Settings > 

Nystagmus analysis

.

View/Layout

Channel distance (°)

Set the distance between the horizontal and vertical 
channel.

Channel scaling (°)

Set the amplitudes displayed for each measure-
ment; 40 will be displayed as -20

°

 to + 20

°

 on the y-

axis.

Horizontal, vertical

Select the channels to be displayed on the screen.

Summary of Contents for Hortmann Vestlab 100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands