36
Otometrics
General test information
Editors
3. Wipe the face cushion, and all areas of the goggles that come in contact with the
patient, gently with the pad or cloth until clean. This is done to remove dirt and
disinfect the goggles.
4. Dispose of the pad or cloth properly after each use.
Dichroic mirror surfaces
Clean both mirrors: Wipe the surface gently with the cloth provided with the goggles
using a rotary motion until the surface is clean. Improper cleaning may scratch the
mirror surfaces.
Video camera lenses
The camera lenses rarely require cleaning since they are protected within the goggle
housing. Never dry-wipe an optical surface as the coating can be easily scratched if
improperly cleaned. Avoid using excessive amounts of the solution; it can get
between the lens components.
Note ·
Lens cleaning solution is available at camera/photography stores.
1. Place a drop of lens cleaning solution on a cotton swab. (Use only a cotton swab
with an appropriate lens cleaning solution.)
2. Wipe the surface gently with the cotton swab using a rotary motion until the
surface is clean.
Goggle housing
The housing is made of molded PVC material which can be cleaned using a damp
cloth moistened with a mild detergent and water solution. Never spray or immerse
the goggle components with the cleaning solutions. This could contaminate the elec-
tronics and/or optics.
1. Moisten a cloth with a mild detergent and water solution until damp.
2. Wipe the soiled surfaces gently with the damp cloth until clean.
3. Wipe the goggles with a clean damp cloth moistened with plain water.
4. Dry the goggles using a dry cloth.
3.7
Editors
3.7.1
Calibration Editor
When a calibration is performed, Vestlab automatically analyzes the measurement
data to build the calibration database. To influence the analysis, you can use the Cal-
ibration Editor to edit the calibration.
Select the Calibration Editor from the Measurement menu, or double-click in one of
the diagrams or right-click on the calibration window.
Summary of Contents for Hortmann Vestlab 100
