Return the Server to the Normal Rack Position
232
Oracle Server X5-2L Service Manual • May 2015
FIGURE 90
Location of the Release Tabs on the Slide-Rails
b.
Continue pushing the server into the rack until the slide-rail locks (on the
front of the server) engage the slide-rail assemblies.
You will hear an audible click when the server is in the normal rack position.
2.
If the CMA is not installed, that is, you removed it because you removed the
server completely out of the rack, install the CMA.
For installation instructions for the CMA, refer to
“Install the Cable Management Arm” in
“Oracle Server X5-2L Installation Guide ”
.
3.
If the cables are disconnected from the rear of the server, that is, you
disconnected the cables because you extended the server out of the rack,
reconnect the cables.
■
For instructions on reconnecting cables to the rear of the server, see
“Reconnect Power and
Data Cables” on page 233
.
■
For detailed information on connecting cables to the rear of the server, refer to
“Rear Cable
Connections and Ports” in “Oracle Server X5-2L Installation Guide ”
.
Summary of Contents for X5-2L
