Oracle X5-2L, Service Manual

Page: 278 / 324

BIOS Advanced Menu Selections
278 Oracle Server X5-2L Service Manual • May 2015
Setup Options Options Defaults Description
of a serial data packet.) The
standard setting is 1 stop bit.
Communication with slow
devices may require more than 1
stop bit.
Flow Control None, Hardware RTS/CTS,
Software Xon/Xoff
None Flow control can prevent data
loss from buffer overflow. When
sending data, if the receiving
buffers are full, a 'stop' signal
can be sent to stop the data flow.
Once the buffers are empty, a
'start' signal can be sent to restart
the flow. Hardware flow control
uses two wires to send start/stop
signals.
BIOS Advanced Menu Trusted Computing Options
The following table describes the BIOS Advanced Menu trusted computing options.
TABLE 29
BIOS Advanced Menu Trusted Computing Options
Setup Options Options Defaults Description
TPM Support Disabled/Enabled Disabled Enable or disable Trusted
Platform Module (TPM)
support. Only UEFI BIOS
implements this setup option. If
disabled, the OS will not show
TPM. Reset of the platform is
required.
TPM State Disabled/Enabled Disabled Displays whether TPM Support
is enabled.
Note - This option is available
only if TPM Support is set to
enabled.
Pending Operation None/Enable Take Ownership/
Disable Take Ownership/TPM
Clear
None Used to schedule an operation
for the security device.
Note -
Your computer will
reboot during restart in order to
change the state of a security
device.
Current Status Information If TPM Support is disabled,
Current Status Information
displays SUPPORT Turned
OFF.”
TPM Enabled Status Disabled/Enabled Disabled Use this option to provide the
current capability state of the
security device.