Oracle X5-2L, Service Manual

Page: 237 / 324

Serial Management Port
Identifying the Server Ports 237
TABLE 14
Network Management Port Signals
Pin
Signal Description Pin Signal Description
1 Transmit Data + 5 Common Mode Termination
2 Transmit Data – 6 Receive Data –
3 Receive Data + 7 Common Mode Termination
4 Common Mode Termination 8 Common Mode Termination
Related Information
■
“Rear Panel Components and Cable Connections” on page 18
■
“Server System-Level Status Indicators” on page 31
■
“Disconnect Cables From the Server” on page 60
■
“Reconnect Power and Data Cables” on page 233
Serial Management Port
The serial management connector (labeled SER MGT) is an RJ-45 connector that can be
accessed from the rear panel. This port is the default connection to the server. Use this port only
for server management.
TABLE 15
Default Serial Connections for Serial Port
Parameter Setting
Connector SER MGT
Rate 9600 baud
Parity None
Stop bits 1
Data bits 8
The following figure and table describe the SER MGT port pin signals.