Oracle X5-2L, Service Manual

Page: 152 / 324

Remove the Storage Drive Backplane for Twelve-Drive Systems
152 Oracle Server X5-2L Service Manual • May 2015
See “Reconnect Power and Data Cables” on page 233 and “Power On the
Server” on page 233 . Verify that the power supply AC OK LED is lit.
Note -
IMPORTANT: When the disk backplane is replaced, the key identity properties (KIP)
of the disk backplane is programmed by Oracle ILOM to contain the same KIP as the other
quorum member components. If you have removed other quorum member components,
you might need to manually program the product serial number (PSN) into the new disk
backplane. For more information, refer to “FRU Key Identity Properties (KIP) Automated
Update” on page 53 .
Related Information
■
“Remove the Storage Drive Backplane for Eight-Drive Systems” on page 146
Remove the Storage Drive Backplane for Twelve-
Drive Systems
1.
Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See “Powering Down the Server” on page 55 .
b. Extend the server into the maintenance position.
See “Extend the Server to the Maintenance Position” on page 61 .
c. Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis.
See “Take Antistatic Measures” on page 64 .
d. Open the server fan assembly door, and remove the fan modules from the
server.
See “Remove a Fan Module” on page 89 .
e. Remove the fan assembly door from the server.
See “Remove the Fan Assembly Door From the Server” on page 65 .
2. Pull each storage drive out far enough to disengage if from the disk backplane.
See “Remove an HDD or SSD Storage Drive” on page 73 .