Oracle X5-2L, Service Manual, Page: 33 / 324

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
Troubleshooting and Diagnostics 33
Status
Indicator Name
Icon Color State and Meaning
OK to Remove Blue ■ STEADY ON – The storage drive can be removed safely during a hot-plug operation.
■ OFF – The storage drive has not been prepared for removal.
†
If a rear backplane hard disk's OK/Activity LED shuts off, it may also indicate that a rear hard disk has spun down into a temporary "suspend" mode, in which
case the disk would again spin up when coming out of suspend mode.
Power Supply Status Indicators
There are two status indicators (LEDs) on each power supply. These indicators are visible from
the rear of the server.
TABLE 4
Server Power Supply Indicators
Status
Indicator
Name
Icon Color State and Meaning
AC OK/ DC
OK
Green ■ OFF – No AC power is present.
■ SLOW BLINK – Normal operation. Input power is within
specification. DC output voltage is not enabled.
■ STEADY ON – Normal operation. Input AC power and DC
output voltage are within specification.
Service
Required
Amber ■ OFF – Normal operation. No service action is required.
■ STEADY ON – The power supply (PS) has detected a PS fan
failure, PS overtemperature, PS over current, or PS over or under
voltage.
Network Management Port Status Indicators
The server has one 10/100/1000BASE-T Ethernet management domain interface, labeled NET
MGT. There are two status indicators (LEDs) on this port. These indicators are visible from the
rear of the server.
TABLE 5 Network Management Port Status Indicators
Status
Indicator
Name
Location Color State and Meaning
Activity Top left Amber ■ ON – Link up.
■ OFF – No link or down link.
■ FLASHING – Packet activity.
Link speed Top right Green ■ Green ON – 1000BASE-T link.
■ OFF – 10/100BASE-T link.