![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_operation-manual_1633402112.webp)
109
ZX-T
Operation Manual
S
ect
io
n
6
Init
ia
liz
ing Se
tt
ings D
a
ta
Section 6
AUXILIARY FUNCTIONS
Initializing Settings Data
This function resets all settings to their default values.
SPAN adjustment settings are not initialized.
Default Values
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
INIT on the main display.
3.
Press and hold down the ENT Key.
The sub-display will display “-----”.
4.
Release the ENT Key once OK is displayed
on the sub-display
The settings will be initialized.
Function
Default Value
Scale inversion
OFF
No. of samples to average
256
Hysteresis width
Sensor Head resolution specification
(Depends on the type of Sensor Head)
Hold
OFF
Zero reset display
0.000 (mm)
Special functions
CLOSE
Monitor focus
At the minimum measurement distance: 4 (mA)
At the maximum measurement distance: 20 (mA)
Linear output correction
No correction
Display reverse
OFF
ECO display
OFF
No. of display digits
5 digits (all)
Non-measurement settings
KEEP
Zero reset memory
ON
HIGH threshold
5.999 (mm)
LOW threshold
−
1.999 (mm)
Summary of Contents for ZX-T -
