![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_operation-manual_1633402048.webp)
45
ZX-T
Operation Manual
Se
c
tion 3
Basi
c Kn
o
w
led
g
e
f
o
r
O
p
e
rat
io
n
Section 3
BASIC OPERATION
Setting Conditions
Display the target function on the main display and select the desired value from the
sub-display to set measurement conditions.
This section uses the example of setting a peak hold as the hold condition to explain
how to set measurement conditions.
Changing to FUN and HOLD
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
HOLD on the main display.
Setting Hold Conditions
3.
Press either the UP or DOWN Key.
The present set value will flash on the sub-display.
4.
Use the UP and DOWN Keys to select
P-H.
Press either the LEFT or RIGHT Key to cancel the
selected option. The display will return to the current set-
ting (OFF in this example).
5.
When you finish selecting the set value, press
the ENT Key to confirm the setting.
The setting will be registered.
Summary of Contents for ZX-T -
