![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_operation-manual_1633402093.webp)
90
S
e
c
tion 5
Ca
lc
ula
ting M
e
a
s
u
re
d Va
lue
s
ZX-T
Operation Manual
Section 5
DETAILED SETTINGS
Calculating Measured Values
This section describes the setting procedure that is used to calculate measured values when
Calculating Units are connected by Amplifier Units. Up to 8 Amplifier Units can be used at one
time, and measured values can be calculated even when Sensors have different measurement
distances.
The ZX-L-series Smart Sensors (Laser Type), ZX-E-series Smart Sensors (Linear
Proximity Type), and ZX-W-series Smart Sensors (Microwave Type) are not compatible.
The 2 types of expressions are outlined in the following table.
Note:
A: Amplifier Unit in which the expression is set (CH2 to CH8)
B: CH1 Amplifier Unit
The response time for CH2 Amplifier Units to which expressions have been set is increased by
1.0 ms. The response time is also influenced by the setting for the number of samples to average, so
the response time will be the response time based on the set number of samples to average
+1.0 ms.
Setting Number of Samples to Average, p. 70
CH1
CH2
CH3
CH8
Calculating Unit
Calculation result output
Calculation result output
Calculation result output
Expression setting
Expression setting
Expression setting
Set the expression using an Amplifier Unit starting at CH2.
Expression type
Description
Application
A+B
(See note.)
Finds the sum of the measurement results for two
Amplifier Units.
•
Measuring thickness
•
Measuring reference surfaces and gaps
A
−
B
(See note.)
Finds the difference between the measurement
results for two Amplifier Units.
•
Measuring height difference
•
Measuring flatness
Summary of Contents for ZX-T -
