![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_operation-manual_1633402068.webp)
65
ZX-T
Operation Manual
Sec
tio
n 4
M
e
a
s
ur
in
g D
e
pth
Section 4
MAIN APPLICATIONS AND SETTING METHODS
Registering Depth
Use the zero reset function to register the Sensor Head position at the reference depth.
Set a reference sample with a known depth (D) under the Sensor Head.
Switch to FUN mode and set the depth on the Zero Reset display ([ZRDSP]).
Set the offset value and then return to the RUN mode.
Press and hold the ENT Key for at least 1 s to reset to zero.
The Sensor Head position will be registered at the same timing that was used when the
zero reset was executed. (The display value here is 3 mm.) Depth is measured based
on this positional relationship of the Sensor Head.
Refer to
Section 5 Detailed Settings
for details on operation.
Using the Zero Reset Function, p. 92
D
FUN
Offset value setting
Example: D = 3 mm
RUN
Press for 1 s min.
Summary of Contents for ZX-T -
