![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_operation-manual_1633402011.webp)
8
Pr
ef
ac
e
P
rec
au
tio
n
s
f
o
r Co
rr
ect
U
s
e
ZX-T
Operation Manual
PREFACE
Precautions for Correct Use
Always observe the following precautions to prevent operation failures, malfunctions, and
adverse effects on performance and equipment.
Smart Sensor Installation
■
Environment
Do not install the Smart Sensor in the following locations:
• Locations where the ambient temperature exceeds the rated temperature range.
• Locations subject to rapid changes in temperature (causing condensation).
• Locations where the relative humidity exceeds the range of 35% to 85%.
• Locations subject to corrosive or flammable gases.
• Locations where dust, salt, or metallic powder accumulate on the Sensor.
• Locations subject to direct vibration or impact.
• Locations subject to direct sunlight.
• Locations subject to exposure to water, oil, chemicals, etc.
• Locations subject to strong electromagnetic or electrical fields.
• Locations subject to water vapor.
Installation and Handling of Components
■
Power Supply and Wiring
• Do not extend the Sensor Head cable by more than 8 m. Use a ZX-XC
@
A Extension
Cable (order separately) to extend the cable from the Sensor.
• Use a shielded cable to extend the Amplifier cable. The shielded cable must have the
same specifications as that of the Amplifier cable.
• When using a commercially available switching regulator, ground the FG (frame
ground) terminal. (ZX-TDS01T and ZX-TDS04T-
@
)
• If the power supply line is subject to surges, connect a surge absorber that meets the
conditions of the application environment.
• When connecting multiple Amplifier Units, connect the linear grounds of all the Ampli-
fier Units.
• The Sensor Head is not flame resistant (ZX-TDS10T-
@@
).
Summary of Contents for ZX-T -
