5-18
Sect
ion5
SETTINGS FOR
FUNCTIONS
ZS-HL
User’s Manual
Section5
Setting Output Processing of Sensing Information
Setting HOLD Functions
Set the hold conditions for measured values. The hold functions hold any value from the
measured values during the specific period (sampling period), such as the maximum or
minimum value.
■
TYPE
Set the hold conditions for measured values.
X
FUN Mode-[OUTPUT]-[HOLD]-[TYPE]
Setting
Description
OFF
Hold measurement is not performed. The measured value is output at all
times. (default value)
PEAK
Holds the maximum value during the sampling period. The output
changes at the end of the sampling period and is held until the end of the
next sampling period.
BOTTOM
Holds the minimum value during the sampling period. The output changes
at the end of the sampling period and is held until the end of the next sam-
pling period.
P-P
Holds the difference between the maximum and minimum values during
the sampling period. This option is selected mainly when detecting vibra-
tion. The output changes at the end of the sampling period and is held
until the end of the next sampling period.
AVERAGE
Holds the average measured value during the sampling period. The out-
put changes at the end of the sampling period and is held until the end of
the next sampling period.
Current
measured value
Max. value
Sampling period
Output
Current
measured value
Min.
value
Sampling period
Output
Sampling period
Current
measured value
Max. value
Min.
value
Output
(max. value - min.
value)
Sampling period
Current
measured value
Output
(average)
Summary of Contents for ZS--LD10GT
