Sect
ion5
SETTINGS FOR
FUNCTIONS
Section5
Saving the settings data
/
Clearing the Settings
5-29
ZS-HL
User’s Manual
Saving the Settings Data
Bank settings and system settings are saved internally on the Sensor Controller.
• The settings of all banks are saved regardless of the currently selected bank No.
• After you have made or changed settings, be sure to save the setup data. All settings will be deleted if
you turn the power OFF without saving the data. A message prompting you to save data will be dis-
played if you change a mode without saving data after you have changed settings.
X
FUN Mode-[SYSTEM]-[SAVE]
Clearing the Settings
Initializing All Settings
Return all bank settings and system settings to their factory settings.
The settings of all banks and system settings are initialized regardless of the currently selected bank No.
X
FUN Mode-[SYSTEM]-[INIT]
Clearing Banks
“Clearing” initializes the settings of the currently selected bank.
FUN Mode-[BANK]-[CLEAR]
Settings in [SYSTEM] and settings displayed in RUN mode are not initialized.
Setting
Description
OK
Saves the setup data.
CANCEL
Does not save the setup data.
Setting
Description
OK
Initializes the setup data.
CANCEL
Does not initialize the setup data.
Summary of Contents for ZS--LD10GT
