Se
ct
io
n 1
FEATURES
Section 1
Part Names and Functions
1-5
ZS-HL
User’s Manual
Sensor Controller
(5)
FAR Indicator
These indicators light up as follows according to the distance between the front of the
Sensor Head and the workpiece.
Both NEAR/FAR indicators are lit up: Measuring center distance ± (measuring range
× 10 %)
NEAR indicator is lit up: Near side within measuring range
FAR indicator is lit up: Far side within measuring range
Both NEAR and FAR indicators are flashing: Outside measuring range
These indicators also double as laser alarm indicators.
- At least one of the indicators will either light up or flash after the Sensor
Head is turned ON.
- Both indicators go out for 15 to 25 seconds after the Sensor Head is turned
ON to indicate that the laser beam is OFF.
- Either of these indicators will light up or flash while the laser beam is being
emitted.
- Both indicators go off when the laser beam is OFF.
(6)
NEAR Indicator
Names
Functions
(1)
Laser indicator
The Laser indicator is lit while the Sensor Head is emitting a laser beam.
(2)
Zero Reset indicator
The Zero Reset indicator is lit while the zero reset function is enabled.
Names
Functions
H
LD ON ZERO ENABLE
P
L
(6) LCD screen
(1) Laser indicator
(2) Zero Reset indicator
(3) ENABLE indicator
(4) Main display
(5) Sub-display
(7) Control keys
(8) Mode switch
(9) Threshold switch
(11) PASS indicator
(10) LOW indicator
(12) HIGH indicator
(13) Sensor Head connector
(18) USB port
(14) Coupler
(15) RS-232C connector
(16) Voltage/Current switch
(17) I/O cable
Summary of Contents for ZS--LD10GT
