Sec
tion2
INSTALLATION &
CONNECTION
Section2
Sensor Controller
2-7
ZS-HL
User’s Manual
Sensor Controller
This section describes installation of the Sensor Controller, and connection of the I/O
cable.
Before connecting/disconnecting peripheral devices, make sure that the Sensor Controller is turned
OFF. The Sensor Controller may break down if it is connected or disconnected while the power is ON.
Installation of Sensor Controller
■
Installing on the DIN track
The following describes how to attach the 35 mm wide DIN track very quickly and eas-
ily.
In advance, attach the ferrite core (provided with the Sensor Controller) to the input/output cable of
the Sensor Controller.
H
LD ON ZERO ENABLE
P
L
DIN track (sold separately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
End plate (sold separately)
PFP-M
Ferrite core
Summary of Contents for ZS--LD10GT
