2-16
Sec
tion2
INSTALLATION &
CONNECTION
ZS-HL
User’s Manual
Section2
SmartMonitor ZS
■
Installing the USB driver
The USB driver must be installed on the personal computer to establish a connection
between the personal computer and the Sensor Controller by the USB interface.
• The exclusive USB driver must be installed only when the Sensor Controller is connected to the
personal computer for the first time. From the second startup onwards, the USB driver is automat-
ically recognized and does not need to be re-installed.
• To install the USB driver, log on as an Administrator or a user with system access rights.
• Install SmartMonitor ZS before installing the USB driver.
• The error message “Failed to pass the Windows logo test” is sometimes displayed at USBinstalla-
tion. Press the [Continue] button to continue with the installation.
1.
Turn your PC ON and startup up Windows.
2.
Connect the Sensor Controller to the
personal computer by the USB cable.
Attach the ferrite core (provided with the Sen-
sor Controller) to the USB cable (provided with
the Sensor Controller).
“Detected new hardware” will be displayed on the Windows tool bar,
and the [New Hardware Detection Wizard] dialog box will appear.
Ferrite core
Summary of Contents for ZS--LD10GT
