3-4
Se
ct
io
n3
APPLICATION and
SETTING EXAMPLES
ZS-HL
User’s Manual
Section3
Measuring the Thickness of Transparent Objects
Measuring the Thickness of Transparent Objects
If you already know the glass thickness, you can adjust the scaling with reference to the
thickness, and easily measure the thickness of a transparent object.
Setting for sensing conditions
1.
Set the mode switch to FUN.
2.
Select [REGULAR] in [SENSING]-
[SETTING].
3.
Select [THICK]-[MODE1] in [SENS-
ING]-[OBJECT].
By fixing the Sensor Head to a position such that it is kept in
parallel with the front side of the workpiece, you can perform
high-precision measurement. When you install the Sensor Head,
we recommend that you match the front side of the workpiece
with the reference surface of the Sensor Head, and then bring
up the Sensor Head horizontally and install it.
[Points for installation]
•
For regular reflection heads (such as ZS-HLDS2T and ZS-LD20T)
•
For diffuse reflection heads
LD POWER: 1.0%
SUB : BRIGHT
Adjust the position of the Sensor Head while checking the
display of the emitted light amount and received light amount.
Adjust the position of the Sensor Head such that the emitted
light amount becomes the minimum compared to 1,000 for the
received light amount.
Received light amount
Emitted light amount
Thickness
Front side
Backside
Raw glass
Sensor Head
Switching the Display of the Measured Value p.4-2
FUN
RUN
TEACH
1
DIFFUSE
2
REGULAR
1
GLASS
2
THICK
Summary of Contents for ZS--LD10GT
