1
Majestic • GLQUARTZ36PLA Installation Instructions • 2643-945 • 4/22
TOOLS
Screw gun equipped with 1/4 in (6 mm). socket or
1/4 in. (6 mm). wrench or socket
KIT COMPONENTS
(1) Left Glass Panel
(1) Right Glass Panel
(1) Rear Glass Panel
(2) Lower Glass Brackets (1 left, 1 right)
(1) Rear Lower Glass Bracket
(2) Upper Glass Brackets (1 left, 1 right)
(2) 3/8 in. (9.5 mm) Sleeves
(4) 1/2 in. (13 mm) self-tapping Screws
(2) 1-1/4 in. (32 mm) screws
(1) Top Refractory Panel
Leave this manual with party responsible for use
and operation.
Installation Instructions
1. If installed, remove existing brick refractory and logs from
appliance.
2.
Remove the screw that secures the pilot assembly to
the pilot bracket and gently pull the pilot upward about 2
inches (51 mm).
3. Locate and remove the two screws that secure the rear
refractory bracket in place. See Figure 2. Retain these
screws for later use.
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
NOTICE:
Handle refractory panels with care. Refractory
may chip or crack if dropped or impacted.
GLQUARTZ36PLA
Models: QUARTZPLA36IN / QUARTZPLA36IL
Black Glass Liner Kit Installation Instructions
CAUTION! Do not install damaged components.
DANGER
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and must be installed for
the protection of children and other at-risk
individuals.
Figure 1 Metal Components - Components Shown Bent
UPPER GLASS BRACKETS
LOWER GLASS BRACKETS
REAR GLASS
BRACKET
NOTE: Install the lower glass bracket so the bend
clearance notch faces the front of the appliance.
BEND CLEARANCE NOTCH
Figure 2 Remove Screws that Secure Rear Bracket to Firebox
REMOVE SCREWS
REMOVE SCREWS
