5-10
Sect
ion5
SETTINGS FOR
FUNCTIONS
ZS-HL
User’s Manual
Section5
Setting for Sensing Conditions
When you set GLASS (MODE2) or THICK (MODE2) for the measurement object, the following parame-
ters are initialized.
• SMOOTH
• AVERAGE
THICK
Mode1
Select this mode to measure the thickness of glass at high speed.
Measures the thickness between and .
(This is not displayed in Multi-Task mode.)
Mode2
Select this mode when you want to measure the thickness of glass stably.
This is effective when measuring the thickness of glass having different reflection
factors on the front side and the backside such as backside deposited glass.
(This is not displayed in Multi-Task mode.)
When MODE2 is selected, the measurement area is set for the front side and back-
side of the glass respectively, and an adjustment is performed for a suitable
received light amount for each area.
When you use SmartMonitor ZS, you can adjust the area while checking the
received light amount.
Setting
Description
Front side
Backside
Measure the thickness.
Raw glass
Front side
Backside
Glass with a film
For example,
backside deposited glass.
Measure the thickness.
Mode 1
Mode 2
Automatically
adjusts the
received light
amount.
Received light amount of the front side
Received light amount of the backside
Area of the front side
Area of the backside
Summary of Contents for ZS--LD10GT
