5-6
Sect
ion5
SETTINGS FOR
FUNCTIONS
ZS-HL
User’s Manual
Section5
Setting for Sensing Conditions
Setting for Sensing Conditions
Set the conditions to be used for detecting workpieces by the sensor.
Setting Measurement Mode
■
Setting the Measurement Mode
Set the measurement mode according to the measurement details (such as moving
speed and measurement point of workpiece).
Select the measurement mode based on the items (e.g. speed, precision, or sensitivity)
that you want to give priority to in measurement.
X
FUN Mode-[SENSING]-[MODE]
• In High-Speed mode, the sampling cycle changes according the actual settings. (When only the
average count is set, the sampling cycle becomes the maximum speed (approx. 110 µs).)
Check the actual sampling cycle at [INFO]-[CYCLE] from the top menu.
• In High-Speed mode, the smooth function is changed to OFF. In modes other than High-Speed
mode, the smooth function is changed to ON.
Setting
Description
STAND
This is the standard measurement mode.
(sampling frequency: approx. 500 µs)
HI-RESO
Select this mode to measure workpieces with sensitivity set high. (default
value)
(sampling frequency: approx. 2 ms)
HI-SPEED
Select this mode to measure workpieces at high speed.
However, you cannot select this menu in Multi-Task mode.
(sampling frequency: the fastest speed of approx. 110 µs)
HI-SENS
Select this mode to measure workpieces with sensitivity set high. In this
measurement mode, sensitivity to received light is much better than the
High-Resolution mode as the sampling time is longer.
(sampling frequency: approx. 4 ms)
Summary of Contents for ZS--LD10GT
