Sec
tion9
APPENDIX
Section9
Updating Firmware
9-17
ZS-HL
User’s Manual
4.
Select [Programs]-[OMRON]-[SmartMon-
itorZS]-[WarpEngineZS] from the Win-
dows [Start] menu.
The [WarpEngineZS] screen is displayed.
When the startup of Warp Engine ZS fails,
the following screen is displayed after a
message appears. Go to “Set the
connection port”.
Setting the firmware information
5.
Click the [Controller information] button
as required.
The model and version of the controller that
is being connected currently are displayed.
6.
Click the [Loading] button and select the
file in which you want to write.
The model and version of the controller that
is held in the file are displayed.
Performing Update of Firmware
7.
Click the [Start upgrade] button in the
displayed [WarpEngineZS] screen.
Summary of Contents for ZS--LD10GT
