Omron Z300 V3 - SETUP, Setup Manual, Page: 81 / 98

80
Model Z300-S2T
(Super-precision
Model)
Z300-S5T
(High-precision
Model)
Z300-S10
(Long-range Model)
Z300-S60
(Super Long-
range Model
RUN Mode Mirror
reflection
Diffuse
reflection
Mirror
reflection
Diffuse
reflection
Mirror
reflection
Diffuse
reflection
Diffuse reflec-
tion only
Distance to measurement
center
20mm
(with beam
cover
attached: 16
mm)
±5.2mm ±44mm ±50mm ±94mm ±100mm ±600mm
Measurement range ±1mm ±4mm ±5mm ±16mm ±20mm
±350
(F.S.700mm)
Light source
Visible-light semi-
conductor laser
(Wavelength: 650
nm, 1 mW max.,
Class 2)
Visible-light semiconductor laser (Wave-
length: 670 nm, 1 mW max., Class 2)
Visible-light
semiconduc-
tor laser
(Wavelength:
658nm,
15mWmax.,
Class 3B)
Beam dimensions (See
note1.)
20µm
×
300µm
(200µm*) TYP. (dis-
tance to measure-
ment center)
*Measurement
region.
30µm
×
400µm TYP.
(distance to mea-
surement center
60µm
×
1000µm TYP.
(distance to measure-
ment center)
0.3 mm
×
16
(10.3*)mm (at
500 mm)
* Measure-
ment region
Linearity
±0.05%
F.S. (See
note 3.)
±0.05%
F.S. (See
note 2.)
±0.1% F.S. (See note 4.)
±0.07%
F.S.(250 to
750 mm)
±0.1%
F.S.(750 to
950 mm)
(See note 4.)
Resolution
0.4µm
(See
notes 5
and 6.)
0.4µm
(See
notes 5
and 6.)
0.4µm
(See notes 7 and 9.)
1µm
(See notes 7 and 8.)
8µm
(at 350 mm)
40µm
(at 600mm)
(See notes 7
and 8.)
Sampling period
(See note 10.)
540µs
LED indi-
cators
NEAR indicator
Lights if the workpiece is close to the measurement center or is on the near side of
the measurement center and inside the measurement region.
Flashes if the workpiece is outside the measurement region or if the density is
excessive or insufficient.
FAR indicator
Lights if the workpiece is close to the measurement center or is on the far side of
the measurement center and inside the measurement region.
Flashes if the workpiece is outside the measurement region or if the density is
excessive or insufficient.
Temperature characteristic
(See note 11.)
±0.01%F.S./ ° C
Environ-
ment
resis-
tance
Degree of pro-
tection
IP64 IP67
IP66
(See note12.)
Ambient operat-
ing illumination
Illumination at light-receiving surface: 3,000l
×
max., incandescent light
Ambient temper-
ature
Operating: 0 to +50 ° C (with no icing or condensation)
Storage: -15 to +60
°
C (with no icing or condensation)
Ambient humid-
ity
Operating and storage: 35% to 85% (with no condensation)
Vibration resis-
tance
10 to 150Hz (double amplitude: 0.35 mm) for 8min each in X, Y, and Z directions
Materials
Controller: Die-cast aluminum/Cable sheathing: Heat-resistant chlorinated vinyl
Connector: zinc alloy and brass
Cable length 2m 50cm
Minimum bending radius 68mm
Weight Approx. 350g Approx. 600g Approx. 550g
Sensor Section 7-1