Omron Z300 V3 - SETUP, Setup Manual, Page: 39 / 98

38
Output Specifications
Notice
Do not exceed the maximum load current specified for the Controller.
*1 ON Current/ON Voltage
This refers to the current or voltage values needed to shift from the OFF
→
ON
state.
The ON voltage value is the potential difference between each of the input termi-
nals and COM IN.
*2 OFF Current/OFF Voltage
This refers to the current or voltage values needed to shift from the ON
→
OFF
state.
The OFF voltage value is the potential difference between each of the input ter-
minals and COM IN.
Item Specification
Model Z300-VC10EV3 (NPN mode) Z300-VC15EV3 (PNP mode)
Output voltage 12 to 24 VDC ±10%
Load current 45 mA max.
ON residual volt-
age
2 V max.
OFF leakage cur-
rent
0.1 mA max.
Internal circuits
COM OUT
Output terminal
+
Load
COM OUT
Output terminal
+
Load
Terminal Block Connections Section 2-5