Omron Z300 V3 - SETUP, Setup Manual, Page: 66 / 98

65
4-2 DIP Switch Settings
Notice
Turn OFF the power supply before changing the DIP switch settings.
4-2-1 Switching to Non-visual Mode
Mode
Sensor mounting
status
Not used
Sensitivity
Analog output
response time
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Output method for
measurement failure
Set when a Linear Sensor Controller is connected instead of a
monitor and console. Making this setting enables the other DIP
switch settings.
Set when using a monitor and console. Making this setting al-
lows measurement conditions to be set on the console using
the menu items displayed on the monitor screen. Waveform
measurement results can also be displayed on the monitor.
Other DIP switch settings are disabled.
DIP Switch Settings Section 4-2