Omron Z300 V3 - SETUP, Setup Manual, Page: 34 / 98

33
2-3 Connecting Peripheral Devices
This section shows how to connect peripheral devices to the Controller.
Notice
Always turn OFF the power supply before connecting or disconnecting a periph-
eral device's cable. The peripheral device may be damaged if it is connected
while the power is ON.
Notice
The various connectors on the Controller are capped when the Controller is
shipped.
When a connector is not being used, leave the cap in place or replace the cap to
protect against dust, dirt, and static electricity.
Connecting a Console
Connect the console Z300-KP to the Controller's console connector.
Connecting a Monitor
Connect the monitor cable F150-VM to the Controller's monitor connector.
ESC TRIG
SHIFT
ENT
CONSOLE
CONSOLE
POWER
SYNC
MONITOR
Connecting Peripheral Devices Section 2-3