Omron Z300 V3 - SETUP, Setup Manual, Page: 25 / 98

24
1-3 A Wide Variety of Useful Functions
Useful Feature for Sensor Installation!
The Sensor's installation conditions and orientation can be adjusted while moni-
toring the CCD's received light density.
Refer to page 118 in the Operation Manual.
Useful for Analyzing the Causes of NG Images!
Laser beam images and waveforms for NG images can be recorded. Recorded
images can be reproduced to help analyze the cause of NG images.
Refer to page 122 in the Operation Manual.
Easy Settings for Measuring Workpiece Thickness and Level Differ-
ences!
Two Sensors can be connected to the Controller, allowing measurement condi-
tions to be set easily.
(Connect the same models of Sensor.)
Refer to page 29 in the Operation Manual.
A Variety of Output Formats!
Not only is analog output available, but communications with external devices
can also be performed via terminal blocks or RS-232C.
For details on terminal block output, refer to page 150 in the Operation
Manual.
For details on RS-232C output, refer to page 157 in the Operation Man-
ual.
For details on analog output, refer to page 173 in the Operation Manual.
Comprehensive Hold Functions!
Hold Mode can be set freely at up to 4 points (times).
Refer to page 65 in the Operation Manual.
A Wide Variety of Useful Functions Section 1-3