Omron Z300 V3 - SETUP, Setup Manual, Page: 38 / 98

37
2-5 Terminal Block Connections
2-5-1 Crimp Terminals and Cables
The terminal block uses M3 terminal screws. Use appropriate crimp terminals
for M3 screws as shown below. Tighten the screws to a torque of between 0.5
and 0.6 N • m.
Notice
Cover the terminal blocks with the Terminal Block Protection Covers. Uncov-
ered terminal blocks can result in electric shock.
2-5-2 Internal Specifications
CHECK
Use a DC power supply with countermeasures against high-voltage spikes (safe
extra low-voltage circuits on the secondary side). Excessively high voltages can
result in electric shock.
Input Specifications
Recommended Crimp Terminals
Manufacturer Model Recommended wire size
Forked J.S.T. Mfg Co.,Ltd V1.25-N3A
1.31 to 1.65mm
2
Round J.S.T. Mfg Co.,Ltd V1.25-MS3
Item Specification
Model Z300-VC10EV3 (NPN mode) Z300-VC15EV3 (PNP mode)
Input voltage 12 to 24 VDC ±10%
ON current *1 5 to 15 mA
ON voltage *1 8.8 V max.
OFF current *2 0.1 mA max.
OFF voltage *2 4.5 V min.
ON delay
RESET input:10 ms max.
Other inputs: 0.5 ms max
OFF delay
RESET input:15 ms max.
Other inputs: 0.7 ms max.
Internal circuits
6.2 mm max.
6.2 mm max.
Forked Round
COM IN
+
Input
terminal
COM IN
+
Input
terminal
Terminal Block Connections Section 2-5