Omron Z300 V3 - SETUP, Setup Manual, Page: 23 / 98

22
1-1 Monitoring While Viewing the Measurement Status
Monitoring suited to the application is possible at every stage from installation
and adjustment to operation and maintenance.
For details on the display, refer to page 12 in the Operation Manual.
Monitor
Sensor
Z300
POWER
SYNC
+
+001.6070
mm
PASS
HI LO ZERO OFF
SCN0 0.48ms
OUT 0
RUN
BRIGHT
DARK
NEAR
+
Sensor0
LV [ 12]
PEAK[199]
Sensor1
LV [---]
PEAK[---]
+001.6070
mm
PASS
HI=+005.0000 mm
LO=-005.0000 mm
RO OFF
SCN0 0.48ms
OUT 0
RUN
+
+001.6070 mm PASS
H
L
thru
ZERO OFF
SCN0 0.48ms
OUT 0
RUN
The status of laser beam images can be
displayed on the monitor screen.
It is possible to make fine adjustments to
the measurement position and to confirm
that the light density is not excessive or
insufficient.
Linear sensor controller-style digital display
is also possible.
Waveforms with measurement values ar-
ranged in chronological order can be dis-
played and so the shapes of the workpieces
moving along the line can be checked.
Monitoring While Viewing the Measurement Status Section 1-1