Omron Z300 V3 - SETUP, Setup Manual, Page: 13 / 98

12
Labeling on Laser Use
The Sensor has the following WARNING label on the side.
Re-labeling
The following labels are provided, to be used selectively according to countries.
for use in the U.S.: FDA label (Aperture label, Caution logo label, Certification and
Identification label)
for use in countries other than the U.S.: Warning label according to EN/IEC standards.
Be sure to turn off the sensor before replacing the label, or your hand or other body parts may
be exposed to the hazardous laser beam radiating from the sensor.
§
Use in the U.S.
When a laser product mounted on a certain device is to be used in the U.S., it has to meet the
requirements set forth by the FDA (regulations for laser products set forth by the Food and
Drug Administration).
Applications have been approved by CDRH (Center for Devices and Radiological Health) for
Z300-S2T, Z300-S5T, Z300-S10, Z300-S60. Three different FDA labels are enclosed in the
sensor package. Attach them to the sensor body.
The Z300 is designed to be built into the finished system unit. Refer to the following technical
standard for installation.
21CFR1040.10 and 1040.11
Z300-S2T Z300-S5T
Z300-S10
Z300-S60
PRECAUTIONS