Omron Z300 V3 - SETUP, Setup Manual, Page: 35 / 98

34
Connecting a Sensor
Connect the sensor to the Controller's sensor connector. Three ferrite cores
(supplied with the sensor) must be attached to the sensor cable. Two ferrite
cores can be connected within 100 mm from the sensor and within 100 mm from
the controller's connector, respectively.
When using an extension cable, make sure that two ferrite cores are connected
within 100 mm from the sensor and within 100 mm from the controller's connec-
tor, respectively.
SENSOR
Within 100 mm
Ferrite core
(Ferrite cores have already been
installed on the sensor. However,
their positions can be changed if
necessary.)
Ferrite core (standard accessory)
Within 100 mm
Ferrite core (standard accessory)
SENSOR
Within 100 mm
Ferrite core
(Ferrite cores have already been
installed on the sensor. However,
their positions can be changed if
necessary.)
Ferrite core (standard accessory)
Ferrite core (standard accessory)
Within 100 mm
Connecting Peripheral Devices Section 2-3