![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3mx-a2002/sysdrive-3g3mx-a2002_user-manual_742838157.webp)
4-66
4-2 Function Mode
4
Func
tions
Setting
ModBus communication requires the following settings. Be sure to set the parameters as shown
below.
If the parameter settings are changed, the new settings are enabled at the point of change.
However, ModBus communication will not start until "485" is selected with the 485/OPE selector
and the Inverter is turned on again.
The parameters of C070s cannot be changed or set through ModBus communication. Set using the
attached Digital Operator.
Communication Procedure
• Follow the procedures below in regard to communication between the external control device and
the Inverter.
1: Frame to be sent from the external control device to the Inverter (Query)
2: Frame to be returned from the Inverter to the external control device (Response)
The Inverter returns a response (Frame (2)) only after receiving a query (Frame (1)) and does not
output a response positively.
Below is each frame format (command).
Message Configuration: Query
Parameter No.
Function name
Description
A001
Frequency reference selection
00 (VR), 01 (Terminal), 02 (Digital Operator), 03 (Modbus
communication)
A002
RUN command selection
01 (Terminal), 02 (Digital Operator), 03 (Modbus
communication)
C071
Communication speed selection
04 (4800 bps), 05 (9600 bps), 06 (19200 bps)
C072
Communication station No. selection 1 to 32
C074
Communication parity selection
00 (No parity), 01 (Even parity), 02 (Odd parity)
C075
Communication stop bit selection
1 (1 bit), 2 (2 bits)
C078
Communication wait time
0 to 1000 ms
Header (Silent interval)
Slave address
Function code
Data
Error check
Trailer (Silent interval)
External controller
Inverter
1
2
Time
Wait time (silent inC078)
Summary of Contents for SYSDRIVE 3G3MX-A2002
