Omron SYSDRIVE 3G3MX-A2002, User Manual

Page: 174 / 254

4-83
4-2 Function Mode
4
Functions
0084h FI start frequency A101 R/W 0 to Max. frequency 0.1 [Hz]
0085h FI end frequency A102 R/W 0 to Max. frequency 0.1 [Hz]
0086h FI start ratio A103 R/W 0 to 100 1. [%]
0087h FI end ratio A104 R/W 0 to 100 1. [%]
0088h FI start selection A105 R/W
0: External start frequency
1: 0 Hz

0089h Retry selection b001 R/W
0: Alarm
1: 0-Hz start
2: Frequency matching start
3: Trip after frequency matching
deceleration stop

008Ah
Allowable momentary
power interruption time
b002 R/W 3 to 250 0.1 [s]
008Bh Retry wait time b003 R/W 3 to 1000 0.1 [s]
008Ch
Momentary power
interruption/undervoltage
trip during stop selection
b004 R/W
0: Disabled
1: Enabled

008Dh
Momentary power
interruption retry time
selection
b005 R/W
0: 16 times
1: No limit

008Eh Electronic thermal level b012 R/W 2000 to 12000 0.01 [%]
008Fh 2nd electronic thermal level b212 R/W 2000 to 12000 0.01 [%]
0090h
Electronic thermal
characteristics selection
b013 R/W
0: Reduced torque characteristics 1
1: Constant torque characteristics
2: Reduced torque characteristics 2
*1

0091h
2nd electronic thermal
characteristics selection
b213 R/W
0: Reduced torque characteristics 1
1: Constant torque characteristics
2: Reduced torque characteristics 2
*1

0092h Overload limit selection b021 R/W
0: Disabled
1: Enabled during acceleration/constant
speed
2: Enabled during constant speed

0093h Overload limit level b022 R/W 5000 to 15000
*1
0.01 [%]
0094h Overload limit parameter b023 R/W 1 to 300 0.1 [s]
0095h Soft lock selection b031 R/W
0: Data other than b031 cannot be
changed when terminal SFT is ON.
1: Data other than b031 and the specified
frequency parameter cannot be
changed when terminal SFT is ON.
2: Data other than b031 cannot be
changed.
3: Data other than b031 and specified
frequency parameter cannot be
changed.

0096h AM adjustment b080 R/W 0 to 255 1
Register
No.
Function name
Parameter
No.
R/W
function
Data Resolution
*1. The Inverter's rated current is "1000".
*2. The second decimal place is ignored when the value is over 10000 (100.0 seconds).