Omron SYSDRIVE 3G3MX-A2002, User Manual

Page: 165 / 254

4-74
4-2 Function Mode
4
Func
tions
*1. There is no response for broadcasting.
*2. Since the change data comprises both MSB and LSB as a set, make the byte to be an even number by adding
1, even if the byte that actually needs to be changed is an odd number.
Refer to "<Exception Response>" below if writing into multiple coils cannot be performed normally.
<Writing Into Multiple Holding Registers [10h]>
Writes into consecutive multiple holding registers.
(Example)
Set 1st acceleration time 1 (F002) to "3000 sec." for the Inverter with slave address 1.
The data resolution of the holding registers "0024h, 0025h" of acceleration time 1 (F002) is 0.01
seconds. To set 3000 seconds, set change data to "300000 (493E0h)".
*1. There is no response for broadcasting.
*2. Specify the number of bytes to be changed, not the number of holding registers.
Refer to "<Exception Response>" below if writing into the multiple holding register cannot be per-
formed normally.
<Exception Response>
The master requires a response for a query except for broadcasting. Though the Inverter should
return a response corresponding with the query, it returns an exception response if the query has
an error.
Query Response
No. Field name
Example
(HEX)
No. Field name
Example
(HEX)
1 Slave address
*1
01 1 Slave address 01
2 Function code 10 2 Function code 10
3 Start address (MSB) 00 3 Start address (MSB) 00
4 Start address (LSB) 24 4 Start address (LSB) 24
5
Number of holding
registers (MSB)
00 5
Number of holding
registers (MSB)
00
6
Number of holding
registers (LSB)
02 6
Number of holding
registers (LSB)
02
7 Number of bytes
*2
02 7 CRC-16 (MSB) 01
8 Change data 1 (MSB) 00 8 CRC-16 (LSB) C3
9 Change data 1 (LSB) 04
10 Change data 2 (MSB) 93
11 Change data 2 (LSB) E0
12 CRC-16 (MSB) 54
13 CRC-16 (LSB) FD