Omron SYSDRIVE 3G3MX-A2002, User Manual

Page: 27 / 254

2-2
2-1 Installation
2
Design
„
Installation and Storage
Do not store or use the product in the following places.
• Locations subject to direct sunlight.
• Locations subject to ambient temperature exceeding the specifications.
•Locations subject to relative humidity exceeding the specifications.
• Locations subject to condensation due to severe temperature fluctuations.
• Locations subject to corrosive or flammable gases.
• Locations subject to exposure to combustibles.
• Locations subject to dust (especially iron dust) or salts.
•Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
„
Transporting, Installation, and Wiring
• Do not drop or apply strong impact on the product. Doing so may result in damaged parts or malfunction.
• Do not hold by the terminal cover, but hold by the fins during transportation.
• Do not connect an AC power supply voltage to the control input/output terminals. Doing so may result in
damage to the product.
• Be sure to tighten the screws on the terminal block securely.
Wiring work must be done after installing the unit body.
• Do not connect any load other than a three-phase inductive motor to the U, V, and W output terminals.
• Take sufficient shielding measures when using the product in the following locations. Not doing so may
result in damage to the product.
Locations subject to static electricity or other forms of noise.
Locations subject to strong magnetic fields.
Locations close to power lines.
Safety Information