manualshive.com logo in svg

Omron SCARA YRCX Series, Programming Manual, Page: 493 / 506

Share
Download
Omron SCARA YRCX Series Programming Manual Download Page 493

7

8

9

10

11

12

13

Changes from conventional models     13-3

 

2

 

Changes from conventional models

1 

Program name

For YRCX, the following two program names which have been special for conventional models (YRC, 
etc.) don't have a special meaning.

A) FUNCTION
B) _SELECT

A) FUNCTION

In conventional models (YRC, etc.), "FUNCTION" has been special program for registering a user 
function. YRCX doesn't have a user function and "FUNCTION" doesn't have a special meaning.

B) _SELECT

In conventional models (YRC, etc.), the "_SELECT" program has been selected and executed  every 
time robot programs were reset.
In YRCX, the program specified at the main program number (or the program executed last if there 
is no specified program there) is selected and executed when robot programs are reset.
For details regarding the main program, refer to "12. Set main program" in "2.1 Program operations" 
in Chapter 12.

2 

Multiple Robot Control

In conventional models (YRC, etc.), robot has consisted of a main group (one main robot, main 
auxiliary axes) and a sub group (one sub robot, sub auxiliary axes).
In YRCX, robot consists of robot 1 to 4 (normal axes, auxiliary axes).
Due to this change, commands for each group have changed to ones for each robot.
For details regarding the command for each robot, refer to "2. Command list with a robot setting" in 
Chapter 5 of this manual for YRCX, and regarding the command for each group, refer to "Command 
list for each group” of the programming manual for conventional models (YRC, etc.), respectively.

SAMPLE

Command for each group: conventional model (YRC, etc.)

 

MOVE P, P1 ··················· Axes of a main group move to the 

position specified by P1.

 

MOVE2 P, P5 ·················· A x e s   o f   a   s u b   g r o u p   m o v e   t o   t h e 

position specified by P5.

Command for each robot: YRCX

 

MOVE P, P1 ··················· A x e s   o f   t h e   r o b o t   1   m o v e   t o   t h e 

position specified by P1.

 

MOVE[2] P, P5 ················ A x e s   o f   t h e   r o b o t   2   m o v e   t o   t h e 

position specified by P5.

• The command with robot setting can be omitted a robot number. If it is omitted, robot 1 is 

specified.

MEMO

Summary of Contents for SCARA YRCX Series



























































































































































































































































































































































































































































































































Reviews:

No comments