Omron CX-MOTION-NCF - V1.9, Operation Manual

Page: 52 / 147

28
Creating a New Project Section 4-1
4-1 Creating a New Project
Creating a New
Project
Use the following procedure to create a new project in the CX-Motion-NCF
Basic Window.
1,2,3... 1. In the CX-Motion-NCF Basic Window, select File - New , press the Ctrl+N
Keys, or click in the toolbar.
2. The PLC Device Type Window will be displayed. Select the PLC Series to
use and click the
OK Button.
Note To connect the Position Control Unit to a network, select the PLC Series con-
nected to the personal computer directly. If the PLC with the Position Control
Unit is selected, the communications settings with the PLC and personal com-
puter may not be set correctly.
3. The PLC will be registered in the project.
When the CX-Motion-NCF is started, a CJ2 CPU Unit will be registered in
the project. If the personal computer is connected to a PLC with a CJ2
CPU Unit, use the project that is already being displayed.