![background image](http://html1.mh-extra.com/html/omron/cx-motion-ncf-v1-9/cx-motion-ncf-v1-9_operation-manual_744182120.webp)
96
Error Codes
Section 11-2
Position
Control Unit
settings
and opera-
tions errors
Illegal data
Position
designa-
tion error
3060
An attempt was
made to execute
RELATIVE MOVE-
MENT using a posi-
tion command value
for the target position
that is outside the
positioning range.
Edit the position command value to be
within the positioning range and execute the
command again.
Speed des-
ignation
error
3061
An attempt was
made to execute one
of the following com-
mands with a nega-
tive value as the
speed command
value.
ABSOLUTE MOVE-
MENT, RELATIVE
MOVEMENT, ORI-
GIN SEARCH, ORI-
GIN RETURN, and
JOG
Edit the speed command value to be within
the setting range and execute the command
again.
An attempt was
made to execute
ORIGIN SEARCH
with a speed com-
mand value of 0.
Edit the speed command value to be within
the setting range and execute the command
again.
Speed con-
trol speed
designa-
tion error
3062
An attempt was
made to execute
SPEED CONTROL
using a command
value that exceeds
the speed command
range.
Edit the speed command value to be within
the setting range and execute the command
again.
Torque
command
value error
3063
An attempt was
made to execute
TORQUE CON-
TROL using a com-
mand value that
exceeds the torque
command range.
Edit the torque command value to be within
the setting range and execute the command
again.
Option
command
value 1
error
3064
An attempt was
made to execute
SPEED/TORQUE
CONTROL using a
command value that
exceeds the com-
mand range in option
command value 1.
Edit the option command value to be within
the setting range and execute the command
again.
Option
command
value 2
error
3065
An attempt was
made to execute
SPEED CONTROL
using a command
value that exceeds
the command range
in option command
value 2.
Edit the option command value to be within
the setting range and execute the command
again.
Override
3070
An attempt was
made to execute the
override using an
override value out-
side the setting
range.
Edit the override value to be within the set-
ting range and execute the command again.
Category
Error name Error code
Probable cause
Clearing method
Summary of Contents for CX-MOTION-NCF - V1.9
