Omron CX-MOTION-NCF - V1.9, Operation Manual

Page: 133 / 147

109
Error Codes Section 11-2
--- --- --- 145 --- 4091 Regeneration
overload The regeneration load
exceeded 85% of regenera-
tion overload alarm level.
A.92 A.92 @ --- --- --- 4092 This warning occurs before
the Regeneration Overload
Alarm (A.32) occurs. If opera-
tion is continued in this state,
an alarm may occur.
--- --- --- 146 --- 4092 Battery warning
(Absolute encod-
ers only) Battery voltage of absolute
encoder decreased to max
about 3.2V (Replace battery
while Control circuit power is
ON).
A.93 A.93
@
--- --- --- 4093 This warning occurs before
the Battery Error (A.83)
occurs. If the power is turned
OFF, an alarm may occur the
next time the power is turned
ON. (Replace the battery
while the control circuit power
supply is ON.)
--- --- --- 147 --- 4093 Fan lock warning Internal cooling fan has
stopped or turned abnormally.
A.94 A.94 @ A.94 148 94 No code
(See note
3.) Parameter set-
ting warning A value outside the setting
range has been set for the
MECHATROLINK slave sta-
tion device.
A.95 A.95 @ A.95 149 95 No code
(See note
3.) MECHA-
TROLINK-II com-
mand warning An illegal communications
command or unsupported
communications command
has been sent to the MECHA-
TROLINK slave station
device.
A.96 A.96 @ A.96 150 96 4096 Communications
warning A single MECHATROLINK-II
communications error has
occurred. (See note 4.)
--- --- --- --- A0 40A0 Overload warn-
ing The load rate exceeded 85%
of the protection level.
--- --- --- --- A1 40A1 Excessive regen-
eration warning The regeneration load rate
exceeded 85% of the speci-
fied level.
--- --- --- --- A2 40A2 Battery warning The battery voltage
decreased to 3.2 V or lower.
--- --- --- --- A3 40A3 Fan warning The fan has stopped for 1
second or longer.
--- --- --- --- A4 40A4 Encoder commu-
nications warning The number of continuous
occurrences of encoder com-
munications errors exceeded
the specified value.
Servo Drive display Position
Control
Unit error
code
Warning
detection
function
Warning details
W
Series
W-series
(Built-in
Communi-
cations
Type)
SMART-
STEP
Junior
(Built-in
communi-
cations
Type)
G-Series
(Built-in
communi-
cations
Type)
G5-Series
(Built-in
communi-
cations
Type)