![background image](http://html1.mh-extra.com/html/omron/cs1w-lc001/cs1w-lc001_operation-manual_742359005.webp)
ix
About this Manual:
This manual describes the installation and operation of the CS1W-LC001 Loop Control Unit, and
includes the sections described below.
The CS1W-LC001 Loop Control Unit (CS1W-LC001) helps you build an instrumentation system
comprising multiple loops and is intended as a CPU Bus Unit on a PC (Programmable Controller).
Please read this manual and the other manuals related to the CS1W-LC001 Loop Control Unit
carefully and be sure you understand the information provided before attempting to install and operate
the Loop Control Unit.
There are four manuals used with the CS1W-LC001. These manuals are listed in the following table.
The suffixes have been omitted from the catalog numbers. Be sure you are using the most recent
version for your area.
Name
Contents
Cat. No.
(suffixes omitted)
SYSMAC CS1 Series
CS1W-LC001 Loop Control Unit
Operation Manual
Describes the basic running of the Loop
Control Unit (excluding detailed
descriptions of the function blocks).
W374
SYSMAC CS1 Series
CS1W-LC001 Loop Control Unit
Function Block Reference Manual
Provides detailed information on the
function blocks.
W375
SYSMAC CS1 Series
CS1W-LC001 CX-Process Tool
Operation Manual
Describes operation of the CX-Process
Tool.
W372
SYSMAC CS1 Series
CS1W-LC001 CX-Process Monitor
Operation Manual
Describes operation of the CX-Process
Monitor.
W373
Section 1 describes the features and system configuration of CS1W-LC001 Loop Control Units.
Section 2 describes the names and functions of parts, and provides other information required to
install and operate CS1W-LC001 Loop Control Units.
Section 3 provides information on the control mechanism, basic operation, exchanging data with other
Units and software, and fail-safe countermeasures for CS1W-LC001 Loop Control Units.
Section 4 describes a simple example of how to use CS1W-LC001 Loop Control Units.
Section 5 describes basic examples of PID control and examples of applied control types.
Section 6 provides information on how to use FINS commands.
Section 7 provides information on errors that may occur during running of CS1W-LC001 Loop Control
Units and guidelines for troubleshooting these errors.
Appendix 1 describes how to use the Step Ladder Program block on CS1W-LC001 Loop Control
Units, Appendix 2 describes how to use the Node Terminal blocks on CS1W-LC001 Loop Control
Units, and
Appendix 3 provides information on how to calculate the load rate, and operation execution times of
each function block and the execution times of sequence commands.
WARNING
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.