Simple Example of Use
Section
4-1
144
4. Wire in the software the analog signals between blocks.
5. Set the ITEMs in each function block.
Set function block initial setting parameters (refer to the item "(S): Initial
setting data" describing how to read/write in the Function Block Reference
Manual) such as direct/reverse action and Set Point setting mode
(Remote/Local) on CX-Process Tool.
Operation-related parameters (refer to the item "(O): Operation Data"
describing how to read/write in the Function Block Reference Manual) such
as PID constants may be set either on CX-Process Tool or CX-Process
Monitor.