![background image](http://html1.mh-extra.com/html/omron/cs1w-lc001/cs1w-lc001_operation-manual_742359011.webp)
xv
The following function blocks described in this manual can be used only
when Loop Control Unit CS1W-LC001 Ver. 2.00 and onwards and CX-
Process Tool Ver. 2.00 and onwards are used:
The following function blocks can be registered on CX-Process Tool
when versions of Loop Control Unit earlier than Ver. 2.00 (Ver. 1.0
,
Ver. 1.20, or Ver. 1.50) and CX-Process Tool Ver 1.50 or onwards are
used. However, if the data of these function blocks is downloaded to the
Loop Control Unit in major item units (units of Loop Control Unit) when
these function blocks are registered on CX-Process Tool, an error
occurs, and only those function blocks are not downloaded. (Other
function blocks are downloaded successfully.)
The following function blocks cannot be registered on CX-Process Tool
when Loop Control Unit Ver. 2.00 and onwards and versions of CX-
Process Tool earlier than Ver. 2.00 (Ver. 1.00 Ver. 1.20, or Ver. 1.50) are
used. For this reason, these function blocks cannot also be downloaded
to the Loop Control Unit.
If the following function blocks already exist on the Loop Control Unit and
are uploaded to CX-Process Tool, only the following function blocks are
not uploaded. (When a new upload is performed, these blocks become
empty.)
ES100X Controller Terminal (Block Model 045), 4-point Warning Indicator
(Block Model 110), Arithmetic Operation (Block Model 126), Time Sequence
Data Statistics (Block Model 153), Receive All Blocks (Block Model 461),
Send All Blocks (Block Model 462)
Likewise, the following functions can be used only when Loop Control Unit
CS1W-LC001 Ver. 2.00 and onwards and CX-Process Tool Ver. 2.00 and
onwards are used:
The following ITEMs can be set on CX-Process Tool when versions of
Loop Control Unit earlier than Ver. 2.00 (Ver. 1.00 Ver. 1.20, or Ver. 1.50)
and CX-Process Tool Ver, 2.00 or onwards are used. However, if the
data of these ITEMs is downloaded to the Loop Control Unit when these
ITEMs are set on CX-Process Tool, only those ITEMs are not
downloaded. (Other ITEMs are downloaded successfully.)
The following ITEMs cannot be set on CX-Process Tool when Loop
Control Unit Ver. 2.0 or onwards and versions of CX-Process Tool earlier
than Ver. 2.00 (Ver. 1.00 Ver. 1.20, or Ver. 1.50) are used. For this
reason, these ITEMs cannot also be downloaded to the Loop Control
Unit.
If a download in major item units (units of Loop Control Unit) or a
download in function blocks units including initial setting data is
performed, the respective defaults are set to the following ITEMs on the
Loop Control Unit.
If the following ITEMs are already set on the Loop Control Unit and are
uploaded to the CX-Process Tool, only the following ITEMs are not
uploaded.